This is topic Wanted: Elmo Super 8 1200' take up reel in forum 8mm equipment for sale/trade at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=002740

Posted by Evan Samaras (Member # 5070) on October 20, 2015, 11:39 PM:
 
I was able to pick up the Elmo ST 1200D at a fair price (I think, and hope it works!) and have a 1200' film coming to me! Nosferatu =} Unfortunately I do not have a 1200' take up reel and haven't found one. Anyone selling or can point me in the right direction? Thank you!
 
Posted by Kevin Clark (Member # 211) on October 21, 2015, 05:17 AM:
 
Hello Evan

Me again! I have a spare Elmo 1200ft reel in very good condition for £15, if you are interested let me know and I will find the postage cost including the reel and Goko lamp cover combined in one parcel.

Kevin
 
Posted by Paul Suchy (Member # 80) on October 21, 2015, 07:31 AM:
 
If you need another 1200 reel in the future, Larry Urbanski sells Goldberg reels on his website for $25.00. Urbanski films has a good selection of film supplies.
 
Posted by Andrew Woodcock (Member # 3260) on October 21, 2015, 08:07 AM:
 
Kevin, please let me know if you ever decide to sell more of these at that price or even higher! [Wink]
 
Posted by Evan Samaras (Member # 5070) on October 21, 2015, 09:29 PM:
 
Thank you Paul! Looks like a good resource!
 
Posted by Paul Suchy (Member # 80) on October 22, 2015, 06:59 AM:
 
Evan-Larry is the best; I have been ordering from him for years and he is a fair and honest seller ( not to mention the man behind Filmrenew).
 
Posted by Gary Crawford (Member # 67) on October 22, 2015, 07:47 AM:
 
there's also Steve Osborne of The Reel Image in ohio.
 
Posted by Evan Samaras (Member # 5070) on October 22, 2015, 10:36 AM:
 
Thank you again Paul,

Thank you Gary,

I have been looking at Steve Osborne's Reel Image, and it looks great! I inquired about some of the new prints that are sold. I'm sure ~$850 is probably a fair price from what I can tell, unfortunately that is just too much for me at the moment. I will have to hope for used prints at half the price or less. Does Steve also sell used prints? I'm sure those prices would depend on the condition and film in question
 
Posted by Bill Brandenstein (Member # 892) on October 22, 2015, 04:58 PM:
 
Steve is one of the best sellers of used prints and keeps wish lists of your desired titles; a good fraction of his sales happen "off-list" as they find intended homes before being offered to his subscribers.
 
Posted by Evan Samaras (Member # 5070) on October 22, 2015, 05:01 PM:
 
That's good to know Bill! Could you give me an idea of the range I could expect when purchasing used prints from him? If possible
 
Posted by Evan Samaras (Member # 5070) on October 27, 2015, 12:58 PM:
 
Kevin,

Thank you so much! Everything arrived fast, in excellent/perfect condition, and extremely well packed may I add! I can't thank you enough!
 
Posted by Bill Brandenstein (Member # 892) on October 29, 2015, 03:21 PM:
 
It's like everything else. Desirable titles will set you back hundreds. Cheap deals are possible on faded, worn, or otherwise imperfect prints. I'd expect to pay about 1/3 less though than on eBay or from certain other dealers. His magazine is only $15 for a year (three or so issues) and his lists are free - both highly recommended.
 
Posted by Evan Samaras (Member # 5070) on October 29, 2015, 03:37 PM:
 
Thank you Bill,

For only $15 a year not only do I get his magazine, but it seems like a good cause to contribute to!
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2