8mm Forum: Bolex SP8 motor needed

This is topic Bolex SP8 motor needed in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=003119

Posted by Barry Webb (Member # 1897) on June 14, 2017, 08:37 AM:

I have just purchased a boiled sp8 projector that needs a new motor if anyone has one .

Posted by Maurice Leakey (Member # 916) on June 15, 2017, 06:16 AM:

Barry
Your Bolex was made by Eumig, and, as such, it has many parts from Eumig models series 700 and 800.
No doubt their same motor was used. Perhaps you could find a junked Eumig but with a working motor.

Posted by Barry Webb (Member # 1897) on June 21, 2017, 09:02 AM:

Hi thanks for your reply got a junk eumig off ebay motor is working fine buy the bolex transformer has just gone bang looking at it the last owner has been playing with the fuse unit as it takes eumig fuses.
Hes shorted something out so it never popped the fuse it took the transformer with it so now i need a transformer.
Ill try another wanted post.

UBB.classic^TM 6.3.1.2