8mm Forum: Bolex SP8 motor needed

»	8mm Forum » 8mm equipment for sale/trade » Bolex SP8 motor needed

UBBFriend: Email this page to someone!

Author

Topic: Bolex SP8 motor needed

Barry Webb
Film Handler

Posts: 79
From: Cornwall, England.UK
Registered: Jan 2010

posted June 14, 2017 08:37 AM

I have just purchased a boiled sp8 projector that needs a new motor if anyone has one .

| IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007

posted June 15, 2017 06:16 AM

Barry
Your Bolex was made by Eumig, and, as such, it has many parts from Eumig models series 700 and 800.
No doubt their same motor was used. Perhaps you could find a junked Eumig but with a working motor.

--------------------
Maurice

| IP: Logged

Barry Webb
Film Handler

Posts: 79
From: Cornwall, England.UK
Registered: Jan 2010

posted June 21, 2017 09:02 AM

Hi thanks for your reply got a junk eumig off ebay motor is working fine buy the bolex transformer has just gone bang looking at it the last owner has been playing with the fuse unit as it takes eumig fuses.
Hes shorted something out so it never popped the fuse it took the transformer with it so now i need a transformer.
Ill try another wanted post.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2