This is topic Singer 2210 on 50Hz... in forum 16mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=000760

Posted by Thor Andre Karlsen (Member # 3021) on April 14, 2012, 10:33 AM:
 
Hi!

I Just bought an Singer Instaload 2110 (the standard model) I taught that it was convertible to 230v 50hz, but thats only the international models, the 2210 don't have a 50Hz pulley. the voltage is easy tho change with a transformer, but the frequency is another story... do anyone have a suggestion?
is the pulleys and transformers interchangeable between 2210 and 2211?

It costs an awful lot to ship it, so I have to keep it.
 
Posted by Joerg Polzfusz (Member # 602) on April 18, 2012, 02:24 AM:
 
Hi,

maybe you can use such a voltage converter?
http://www.spannungswandler.us/shop/article_HE-300/Minwa-Spannungswandler-110_120--%3E-220_240V-300-Watt.html?shop_param=cid%3D52%26aid%3DHE-300%26

Jörg
 
Posted by Thor Andre Karlsen (Member # 3021) on April 19, 2012, 02:20 PM:
 
I can do that, but thats not the problem, the problem is the frequency, (which an voltage converter don't change) in an AC motor its the frequency that governs the RPM, its made for 60hz and where I live its 50hz, the motor will then give the projector a frame rate of 20FPS.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2