8mm Forum: Very Important Update on Topic: Bell & Howell 16MM Projector No power

This is topic Very Important Update on Topic: Bell & Howell 16MM Projector No power in forum 16mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001228

Posted by Bill Shenette (Member # 4561) on February 04, 2015, 12:18 PM:

I have good News due to an error on my part.
I've received a recent email from a member it was on the
Topic: Bell & Howell 16MM Projector No power.
It is all right now, I have power to the projector.
I just need to replace one of the belts. I am thinking,
should purchase a whole belt kit ?

The wide rubber one is streched.

Nothing works I am assumeing that this belt is the main drive belt for the projector.

Thanks and Ill keep you all updated
Sincerely Bill

Posted by Barry Fritz (Member # 1865) on February 09, 2015, 07:00 PM:

Sooo the problem was not a lack of power? Never heard of a belt having anything to down with power supply. Perhaps you meant the sprockets, spindles and fan did not turn?

[ February 09, 2015, 10:56 PM: Message edited by: Barry Fritz ]

Posted by Bill Shenette (Member # 4561) on February 11, 2015, 08:44 PM:

Hello actually it was a screw that was messing me up:(.
I had a short screw where a long one should have gone.
Because of the electrical switch on/off hidden.

UBB.classic^TM 6.3.1.2