Posts: 85
From: Shrewsbury, MA, USA
Registered: Nov 2014
posted February 04, 2015 12:18 PM
I have good News due to an error on my part. I've received a recent email from a member it was on the Topic: Bell & Howell 16MM Projector No power. It is all right now, I have power to the projector. I just need to replace one of the belts. I am thinking, should purchase a whole belt kit ?
The wide rubber one is streched.
Nothing works I am assumeing that this belt is the main drive belt for the projector.
Thanks and Ill keep you all updated Sincerely Bill
-------------------- Live life to the fullest each and every day. You never know when you will be called home to Glory.
Posts: 1061
From: Burnsville, MN, USA
Registered: Dec 2009
posted February 09, 2015 07:00 PM
Sooo the problem was not a lack of power? Never heard of a belt having anything to down with power supply. Perhaps you meant the sprockets, spindles and fan did not turn?
[ February 09, 2015, 10:56 PM: Message edited by: Barry Fritz ]
Posts: 85
From: Shrewsbury, MA, USA
Registered: Nov 2014
posted February 11, 2015 08:44 PM
Hello actually it was a screw that was messing me up:(. I had a short screw where a long one should have gone. Because of the electrical switch on/off hidden.
-------------------- Live life to the fullest each and every day. You never know when you will be called home to Glory.