This is topic SUPER 8 SOUND STRIPE in forum General Yak at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=000590

Posted by Alex Fox (Member # 94) on May 12, 2007, 01:50 PM:
 
Would any of you techincal knowledgeable gentlemen know what the freqencey range off the magnetic stripe on SUPER 8 FILM is. Thanks
 
Posted by Paul Adsett (Member # 25) on May 12, 2007, 02:56 PM:
 
Hi Alex,
The specs for super 8 stereo magnetic stripe, recorded on the Eumig S938 Stereo projector are as follows:

Frequency range(at 18fps) 40 to 11,000 Hz
Signal to noise ratio Better than 50db
Wow and flutter less than 0.4%

This was calibrated at 18fps. At 24 fps the frequency response would be significantly better, probably above 13,000hz.

The specs for the Elmo GS1200 were published as:
Frequency response at 24fps 50hz to 13,500 hz
Signal to noise ratio 50 db track 1, 40 db track 2
wow/flutter less than 0.7%

These specs are far superior to anything you would get from 16mm mono optical sound which is about 100 to 6,000hz.

[ May 12, 2007, 07:51 PM: Message edited by: Paul Adsett ]
 
Posted by Alex Fox (Member # 94) on May 13, 2007, 03:55 PM:
 
Hello Paul Thank you for the information Alex
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2