This is topic Berthiot F=50 1:3.5 in forum 9.5mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=9;t=000203

Posted by Luigi Castellitto (Member # 3759) on July 25, 2013, 05:59 AM:
 
Do you know if a "Som Berthiot Pan Cinor F=50 1:3.5" which is on a Pathé Webo A I'm going to buy, I could use it on a Ercsam Camex GS 9.5 mm (that i have)?
To me they seem compatible, What about you?
Thank you" [Smile]
 
Posted by Dominique De Bast (Member # 3798) on July 25, 2013, 09:03 AM:
 
You have to know the size of the mount. A common size is reffered as "C" mount. It is difficult for me to check from a mobile phone as I cannot open several sites a a time but you should find this information in the specifications of both cameras. Good luck for the film you shooted !!!!
 
Posted by Luigi Castellitto (Member # 3759) on July 25, 2013, 11:36 AM:
 
Hi Dom!
I've surfed a lot for the web, but the information is conflicting, so I left the doubt!
Thanks as always! [Cool]
 
Posted by Dominique De Bast (Member # 3798) on July 25, 2013, 11:49 AM:
 
Following the small search I did, I would say it is not compatible as one site says that Pathé Webo as a specific mount and another site speaks of the compatibility of the Ercsam with another make but don't mention the Pathé Webo. I guess the only way to know is to wait for your camera to arrive and to check. I hope you find a good projector soon.
 
Posted by Dominique De Bast (Member # 3798) on July 26, 2013, 03:05 AM:
 
Don't forget to tell us when you receive the camera.
 
Posted by Luigi Castellitto (Member # 3759) on July 28, 2013, 07:32 PM:
 
Thanks, Dominique. Fortunately we made the comparison with the seller, he confirmed the incompatibility, and changed the subject.
I'm always looking for the projector, also because I have old Pathè movies to watch, as well as mine! [Smile]
 
Posted by Dominique De Bast (Member # 3798) on July 29, 2013, 05:30 AM:
 
When you will have the projector, you will want to shoot more films and to buy more professionnals releases, so it will be more and more interesting. The thing is to be patient (and to save money to be ready when occasions occur...).
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2