Tweet
I am selling my partly converted Eiki RM projector and parts, manual, etc. for anyone interested in completing the project to 9.5mm The basic machine was for 110 volts but have transformer and motor for 240 volts. I converted the sprockets and have a GEM front pressure pad to replace the original 16mm one. I am never going to complete the project now so for anyone interested they can have it for £10 which will cover the cost of the transformer and motor which I had to purchase. The original machine minus these parts cost me £50 some years ago! Ken Finch.
- Welcome to the new 8mm Forum! The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate. To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above. Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here. Once the registration has been approved, you will be able to login via the link in the upper right corner of this page. Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face. Thank you!
Comment