I’m looking for a CIR Tape Splicer. I know it won’t be cheap but would rather not spend £350 for a new one!
Announcement
Collapse
No announcement yet.
9.5mm CIR Tape Splicer
Collapse
X
-
Look likes the Price has gone up to 490 Pounds see
https://www.ebay.co.uk/itm/224905755...3ABFBMyruMmflf
-
Wittner-Cinetec also has the 9.5mm CIR Splicers at 590 Euro, plus the 9.5mm Splicing Tape.
https://www.wittnercinetec.com/epage...lmklebepressen
Comment
-
A CIR 9.5mm Splicer had 18 Bids, and Fetched 191 Pounds.
https://www.ebay.com.au/itm/Vintage-...rdt=true&rt=nc
Comment
-
There is a 9.5mm CIR Splicer, you can Buy It Now, in UK.
https://www.ebay.co.uk/itm/225175232...3ABFBM5Mb54_Zg
Comment
-
If you cannot afford a cir splicer there are plenty of cement ones about quite cheap. I have just had a look on eBay and it appears splicing cement is still available including Kodak, Agfa embacoid and another I am not familiar with. I have used embacoid on 9.5mm film ion the past and used the last drop recently on 16mm. I had a bottle of ELF cement but it dried up before I could use it. It was stored in the same place as the embacoid which I had obtained very much earlier! I now use a CIR splicer for 9.5mm which I obtained for £50 many years ago from a shop in Arundal
Comment
Comment