Welcome to the new 8mm Forum!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
Hi everyone, I'm trying to work out the best way to clean 9.5mm film efficiently, the hole on the spools is too narrow for my rewinding arms or any arms of some of my other units. Is there some rig I could create that will give me the same results?
Thanks!
Jacob
If you have a 9.5mm projector, which I assume you have as you have 9.5mm films, you could use that for rewinding whilst cleaning with a cloth lightly soaked with isopropyl alcohol.
Tweet
Cleaning 9.5mm pathe? Help needed
Comment