Tweet
Hi All, i recently acquired a Bauer P8 projector the only issue is that it doesn't work, the bulb lights up when switched to run and the green film loading switch is pressed down but the motors not starting,i've checked the fuses and they seem OK,ive done a bit of reading up and it seems that it could be the film break switch that's faulty, has anyone had to carry out this work on a P8 if so how did you remove the switch?.
- Welcome to the new 8mm Forum! The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate. To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above. Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here. Once the registration has been approved, you will be able to login via the link in the upper right corner of this page. Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face. Thank you!
Comment