Great new CL Roller Option in the EU/UK.

[Mark Todd]

Hi just found these, they are milled, not 3D, and also have little rubber O rings, so very good for running and also film protection.

Look good in the black too.

The chap seems very nice, and a good site too.

Hope it helps CL owners out.

https://s8profis.de/de/Film-Fuehrung...lmo-16-AL.html

Best wishes Mark.

[Terry Sills]

I actually posted this solution some years ago when I acquired a 16CL which had the problem of deteriorating rubbers on the film guide rollers. I simply cleaned off the old rubber from the steel rollers ( a bit messy) and fitted a O rings the full width of the roller. The critical thing is to find O rings that are not too thick so that they are well below the top of the roller flanges thus maintaining the film guide principle. The O rings are cheap and can easily be stretched over the roller flange for a tight fit on the roller.