Tweet
Ampro Stylist. I have an Ampro Stylist which is the bane of my life. The amplifier shows very poor, almost indistinct response, and upon stripping it down to see if I could find the problem, I find the circuit board is a nightmare to get into, let alone work on the caps etc. I have checked all the valves (I have a spare Ampro which I have used as valve spares etc), so have checked the valves best I can, along with the photo electric cell etc. I am no expert on electronics, so am careful with what I am fiddling with! But I can change caps, resistors etc, only I can't even begin to get into the circuit board, without breaking something untoward! Any advice please, apart from chucking it all into the skip! Thanks
-
-
Patrick
Have you got the Repair Manual?
Ampro Corporation Premier Series Printed Manual (camera-manual.com)
Maurice -
I am just about to service three of these Units, here is a copy of the service manual , I cant upload it here as it is too big but you are welcome to a download.
Nick
www.panchromatic.co.uk/Stylist_Service_Manual.pdfComment
-
This might help?
Nick
Comment
-
Thanks Nick and Maurice, I can work off that I think.Comment
-
Nick,
Thank you for the download link!Comment
Comment