Welcome to the new 8mm Forum!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
Hi if anyone has a old Elmo CL-16 that is being scraped and has the newer type rear take up toothed spindle I would like to buy it from you.
IM in the UK and can't seem to get hold of one at a good price .
If someone has the toothed belt as well that would be fantastic.
Richard patchett has one of these kits left, i believe these are the original elmo ones. I changed mine recently to the tooth belt type, much better design than the original flat belt, although i will say some one had put the belt on the wrong way round, so check if your's is correct, as this will slip more than normal.........
Tweet
Comment