Welcome to the new 8mm Forum!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
im wanting to replace a dead camera on my Elmo trv-16g. Does anyone know which make and models would work and also if anyone has replacement instructions. Any help much appreciated.
Hey Scott, I came across this old post. My friend Stan and I have started restoring old Elmo Trv-16 machines. I do the mechanical repairs and Stan replaces the old 240 line ccd camera with a raspberry pi camera at 1440 x 1080 resolution. What camera did you decide on going with?
Tweet
Comment