Welcome to the new 8mm Forum!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
I'm restoring a Bell & Howell 185 16 mm sound projector, and I was testing it with a sound film..., everything was going well and after few minutes the speed change by itself to high speed.
Can anyone in the forum please help me on how to adjust the speed to the normal sound speed ?
Thank you so much
Osvaldo
Osvaldo
I got your PM so I am answering your posting here.
Click below for servicing some Bell & Howell projectors. In your case, scroll down to page 36 together with figure Z for adjusting the speed governor. The 185 hails from about 1950 and is known here in the UK as model 621. BH179OS.pdf (film-tech.com)
Comment