Tweet
Hello, I am having a clear out of some of my projectors. If memory serves I have 5 ELMO GS1200 projectors. All work but two have the autoload button issue (it stays down, micro switch at rear needs replacing, Forum member told me how to do, easy, just never got around to it) One has a crack in the casing (Thanks Parcelfarce) One has been converted to HID (but untested as the 3 pin kettle socket has been replaced with an unusual out put) The last one works but has the crackling banging sound. Some have covers and all have been serviced whilst in my keep, and are clean etc etc. (I have two mint in the box GS1200's that Im keeping) Id sell all 5 for £2000 or £500 each. Could post BUT!!!!!!! Located in Bristol, any inspection is welcome. thank you
- Welcome to the new 8mm Forum! The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate. To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above. Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here. Once the registration has been approved, you will be able to login via the link in the upper right corner of this page. Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face. Thank you!
Comment