Welcome to the new 8mm Forum!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
Hi all, just realised why my newly acquired SC18 was auto loading, the lower green guide is missing. Im assuming a part from an abandoned Elmo super 8 might fit (st1200, st600 etc) Please see the pic attached, no guide and the film just concertinas on itself. If you have a part that would suit please message with cost and postage to Bristol, UK. Many thanks in advance.
UPDATE: Have now found an image of the missing part, as you can see from my first image, this part definitely is missing, plus its sprung wire and two slotted screws, if you can help, thank you
Tweet
Comment