I now have a chinon sound 7000 projector and a few reels. My question is a simple one - can this projector play standard and super 8mm reels?
Announcement
Collapse
No announcement yet.
Projector question
Collapse
X
-
Chinon Sound 7000 MVmarketed in 1977-78
super 8 mm film
lens: Chinon Zoom f: 1.3 \ F: 15-30 mm
lamp: 100 W, 12 V, EFP
pilot lamp: built-in on main switch, 4 V-0.75 A (KE-030)
reel capacity: 180 m
film loading: automatic threading
projection: forward, reverse
projection speed: 18, 24 fps
sound: magnetic playback on main sound track
sound mode: mono
picture/sound distance: 18 fps
amplifier: 2 ICs, 4 transistors, 12 diodes
amplifier output: 4 W (4 Ohm)
frequency response: ?
recording: magnetic recording on main track, sound-on-sound
recording level control: auto
input terminal: Microphone (0.5 mV, -66 dB, 1.2 kOhm) Auxiliary (300 mV, 470 Ohm)
input jacks: Microphone: 3.5 mm mini jack; Auxiliary: RCA jack
output terminal: Monitor/Line-out, External Speaker
output jacks: Mon/Line: 3.5 mm diameter jack; Ext Sp: RCA jack
built-in speaker: 2.3 W (4 Ohm)
motor: DC magnetic motor electronically controlled
power source: 100-115-127-220-250 V AC, 50/60 Hz, 180 W
weight: 7200 g
dimensions: 180 (W) x 245 (H) x 340 (L) mm
made in Japan by Chinon
Comment
-
The MV (multi-voltage) takes the 12 volt EFP 100 watt lamp. Without the MV (US and Canada only), it takes the 120 volt DNE 150 watt lamp. Many of their other models follow that same convention. It saved them a few bananas (no transformer) to have the lamp run off mains voltage. The DNEs burn out quickly, though.
If you decide you want to play Standard 8mm too, don't jump in without doing some research here, followed by questions. Whatever you do, don't buy a sprocketless dual-8 projector! Or any other sprocketless projector!
- Likes 1
Comment
Comment