Tweet
Hello all. Perhaps some one can shed some light on my, ahem, light issue with my Bauer t600. The projected image is fine and bright, but, there is a stray white light at the top and outside of the frame. Ive checked where its coming from, and its around the gate area, light is leaking g over the top of the lens onto the screen. If I push the pressure gate inwards it reduces/closes off the stray light. So, is it worth me partially unscrewing the gate and checking its alignment, or is there a simple fix? Awaiting your kind replies. Stay safe.
-
-
Sounds like the front pressure pad isn't positioned correctly. Have you removed this recently?.When you push it back onto the two metal pins underneath the gate,make certain you've pushed it right in,so it clicks.
The other thing to try is adjustment of the gate pressure pad. The bottom pin of the two ive just mentioned should be slotted,and you can put a screw driver in to adjust the pressure on the front part of the gate. -
Mark,have you sorted this?Comment
Comment