Welcome to the new 8mm Forum!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
Kodak M80 Manual
On the machines I know with a latch (Elmo), the latching guide latches only for threading, and releases when you go to either "run" or "stop". Basically they bend in to accept the very tip of the leader and bend it down to the gate. Once the film is in there, they release to keep the guide off the film surface and reduce film wear.
Hi James... I have a PDF copy of the Kodak m80 projector service manual. If you PM me I can send you a copy. Perhaps it will help you solve the problem.
Comment