Welcome to the new 8mm Forum!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
Do you know if gs1200 run on crystal sync 24fps?
For example; can i project a disneyfilm and sync it up simultaneously with the same movie from Youtube?
YOuTube has so much variables and compressions.
I would rather do that with a DVD.
They're cheap and in a lot of spoken languages.
Disney cartoons over 30 sometimes.
Definitely YES. What you need is a "sync pulse" - merely a square wave audio signal of the said frame rate. Once you feed in the pulse the projector will follow it at dead accurate speed. Therefore you'll have to make certain about the audio source's frame rate - whether it's 23.976 (NTSC std.), 25 (PAL std.), or true 24 fps? Then using any audio editing software to create the "sync pulse" audio file of that frequency.
Tweet
Comment