Beaulieu 708EL Pro Stereo - audio line output cable

[Brad Miller]

First, by chance does anyone on the forum have a spare audio line output cable for a Beaulieu 708EL Pro Stereo projector they would be willing to sell?

Second, assuming the probably likelihood that nobody has a spare cable, does anyone know the pinout so I can custom make a cable?

Thanks!

[Terry Sills]

Brad
If you can supply a picture of the cable, I at be able to help. I have a box full of different types.

[Maurice Leakey]

Brad

Not sure abut your model, but here are pin details for my 708 EL Stereo.

Pin #1 = nothing
Pin #4 = Remote control
Centre pin #2 = Earth
Pin #5 = Modulation output
Pin #3 = A strange marking which is anybody's guess !!

Hope it helps


Maurice

[Chip Gelmini]

Maybe Steve Osborne might have a part you need I'm not sure but you Should contact him and find out

[Brad Miller]

This is the back of my Beaulieu. I'm assuming AUX is auxiliary input and LINE is line output. It's been too many years! Can anyone with one of these verify that please?

Also I'm assuming I can simply use this cable:
https://www.amazon.com/dp/B07WNTNBF2

[Maurice Leakey]

Brad
Just checking the handbook of my 708 EL Stereo.

AUX = Low level input on pins 1 & 4. Pin 2 is earth.
LINE = High level input and output. Pins 3 & 5 are input. Pins 1 & 4 are output. Pin 2 is earth.

As regards the cable, you will have to check to which pins the red and white plugs are connected to. I assume the DIN plug is a 5-pin, not a 3-pin.

Pin numbers are as follows on the 5-pin plug. Looking directly at the pins with the cover on and holding so that the locating cut-out is at 6 o'clock, and reading clockwise from 9 o'clock = 3-5-2-4-1. Therefore pin 1 is at 3 o'clock.

Help this all helps you.



Maurice

[Maurice Leakey]

Click for pin details

http://hilmanind.com/pinouts/atkey.htm



Maurice