Tweet
I went to play a sound film today and my projector was silent. I took off the back to examine what was going on and I discovered one of the leads was not connected (the white one) the other lead from this pair goes down to points around the fuse as does this one.
Could one of you who have a Eumig S810D look and see where the proper connection point is. I'm in the USA so am running on 110v AC at 60 Hz, of course. If you could take a picture of a PROPER configuration or describe it to me, it would be much appreciated. I have no clue how this one got disconnected. I've attached pictures showing the projector and the white wire that needs a home and some of the prospective choices, but of course, I want to choose the right one!! Thanks so much.
Could one of you who have a Eumig S810D look and see where the proper connection point is. I'm in the USA so am running on 110v AC at 60 Hz, of course. If you could take a picture of a PROPER configuration or describe it to me, it would be much appreciated. I have no clue how this one got disconnected. I've attached pictures showing the projector and the white wire that needs a home and some of the prospective choices, but of course, I want to choose the right one!! Thanks so much.
Comment