Announcement

Collapse
No announcement yet.

Elmo K-100 belt issues

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Lindsay Morris
    replied
    Maurice, Brilliant exactly what I needed. On this machine there is nothing inside the rear cover as far as a label like that goes. I have copied it onto a bit of stiff card and glued it inside the cover for the next poor sucker who has to change one.

    I sort of got somewhere near the correct arrangement but rewind was flaky..Now its sorted and goes well. Thanks to both of you.

    Leave a comment:


  • Maurice Leakey
    replied
    Here it is. Click below:-
    https://8mmforum.film-tech.com/cgi-b...=006609#000000


    Maurice

    Leave a comment:


  • Tom Dennis
    replied
    Hello Lindsay

    Go into forums archives and search using member name Steven Dotsch November 06 2011

    Leave a comment:


  • Lindsay Morris
    started a topic Elmo K-100 belt issues

    Elmo K-100 belt issues

    Anyone have a diagram of how the rather long belt which drives the takeup and feed spools is setup??? I have a K100 brought to me to be fixed and the belt had come off and gotten tangled with the drive belt and shutter assembly.
Working...
X