GS1200 : Back Cover Fixtures

[Phil Murat]

When Back Cover is often Removed / Reinstalled, this can be done without using any tool.

If you like these "Thumb" screws (Red or Black, Select "M4" Size) , you can find them here :

https://fr.aliexpress.com/item/32995228198.html

[Joe Taffis]

Hi Phil, that's a good idea! luckily I don't have to open up my GS very often...

[Flavio Stabile]

That’s really a great news! I was looking for these kind of screws since a long time... many thanks for the link, Phil!

[Phil Murat]

Thanks Flavio,
Already installed 4 of them and fit pretty good....
I suggest to replace former spring washers by nylon washer to get a smooth tightness too.
Quality is very good, screw rod is stainless steel.

[Antoine Orsero]

Thank you Phil, I order

[Phil Murat]

Hello Antoine,

You will not be desapointed ......

Don't forget to order some "Nylon" Washers (Thickness 3mm, inner Diam 4mm), this is much better than spring washer for this application ......

However , it takes one month to get these parts (Thumb screws, Nylon Washers, etc...)