Tweet
I have had an Elmo ST180m for some years now and ever since it was purchased it has had minor focussing issues. When focussing a print, if you focus the left side of the print, the right side is slightly out of focus and vice versa. Would any of the members know if this is a gate pressure plate adjustment issue, or could it be a lens alignment issue. It would be nice to be able to eliminate this problem. Your suggestions would be greatly appreciated.
- Welcome to the new 8mm Forum! The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate. To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above. Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here. Once the registration has been approved, you will be able to login via the link in the upper right corner of this page. Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face. Thank you!
Comment