Welcome to the new 8mm Forum!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
Announcement
Collapse
No announcement yet.
Need EUMIG MARK S 700 or 800 series switch and tubes for tube amp.
Need EUMIG MARK S 700 or 800 series switch and tubes for tube amp.
Dear Forum members, I broke my EUMIG MARK S switch trying to fix the projector, see photo. Does anyone one here in the forum has a replacement part that can sell me or donate, it seems the switch is the same for the MARK S, 700 and 800 series. I also need replacement tubes for the tube amp. Any help is appreciated.
Julian, the vacuum tubes can be found all over the internet, including eBay. In case you don't have the pasted sticker in your rear cover showing which 9-pin miniature tube goes where, I am including a diagram that also shows which tubes you need.
Tweet
Comment