Hi there,
I have bought a few P8 projectors to embark on digitising old cine film for the family. Trying to make the best one out of a few!
One always has power regardless of the power switch position but doesnt have any power to the lamp. I seem to remember reading about this same situation somewhere and wondered if anyone knew if they were related and how best to fix.
Its a P8m.
Any advice greatly received.
Thanks
PS are there any tear down pictures that the more experienced members have produced over the years..? If not I will start a set when I disassemble this one.
- Welcome to the new 8mm Forum! The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate. To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above. Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here. Once the registration has been approved, you will be able to login via the link in the upper right corner of this page. Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face. Thank you!