Announcement
Collapse
No announcement yet.
Editing and splicing super 8
Collapse
X
-
One thing I also wanted to find out is if anyone uses lightboxes when editing by hand. For example if you were painting onto the film with indian ink or scratching onto it. I'm tempted to get a lightbox or an overhead projector for painting on the film with.
-
Originally posted by Maurice Leakey View PostDaniel
This is one which I can recommend. I have one of these which takes tape patches. It's a great price and post free.
You can't go wrong.
LPL Super 8 S8PT Patch Tape Splicer | eBay
Maurice
Leave a comment:
-
Originally posted by Lee Mannering View PostDaniel. Treat yourself the the BONUM TAPE SPLICER
It uses tape patches to tape your film together and long lasting. Had mine for at least 40 years and carry it with me when out projecting films.
The favourite with film makers was the Wurker splicer also tape which makes near invisible joins 4 or 2 frames.
Good luckthese look awesome.
Leave a comment:
-
Originally posted by David M. Leugers View PostJust a note on film cement. You must always use "fresh" cement. If the cement has gotten old the splices will not last. Make every effort to keep your cement from evaporating (this is what kills it eventually). I use cement splices almost always now and I have many films I spliced with cement back in the 1970's and 80's without a failure. The new formula Kodak film cement works great. There used to be other excellent film cements for sale but I would not trust an old bottle of cement from decades past.
Leave a comment:
-
Originally posted by Janice Glesser View Post
Leave a comment:
-
Daniel
This is one which I can recommend. I have one of these which takes tape patches. It's a great price and post free.
You can't go wrong.
LPL Super 8 S8PT Patch Tape Splicer | eBay
Maurice
- Likes 1
Leave a comment:
-
Daniel. Treat yourself the the BONUM TAPE SPLICER
It uses tape patches to tape your film together and long lasting. Had mine for at least 40 years and carry it with me when out projecting films.
The favourite with film makers was the Wurker splicer also tape which makes near invisible joins 4 or 2 frames.
Good luck
- Likes 1
Leave a comment:
-
Daniel
It is much more convenient to use splicing tape/s. This will avoid the problem of whether cement is usable, and as mentioned, cement doesn't have a very long life once initially opened.
Super 8 Splicing tape x 50 Splicing tabs Film joining splicing tape (UK Stock) 5055290635000 | eBay
Maurice
- Likes 1
Leave a comment:
-
Just a note on film cement. You must always use "fresh" cement. If the cement has gotten old the splices will not last. Make every effort to keep your cement from evaporating (this is what kills it eventually). I use cement splices almost always now and I have many films I spliced with cement back in the 1970's and 80's without a failure. The new formula Kodak film cement works great. There used to be other excellent film cements for sale but I would not trust an old bottle of cement from decades past.
- Likes 1
Leave a comment:
-
- Likes 1
Leave a comment:
-
The new Ektachrome, and Tri-X are acetate-based films. Film cement is fine but I have found that super glue actually works better and is stronger when splicing films together. I've used this method for years, and the splices are holding up like new. I never was able to get film cement to work properly. I'd project the same movie a few times, and have the splices come loose during projection, which is a mess! This may be a bit unorthodox but when done properly the splices are rock solid. I use a film splicer that provides good clean splices, and makes it easier for gluing the films together. My trick is using a toothpick to spread the glue onto the splice area. You have to be careful not to use to much super glue just enough to coat the entire length of the splice. Once you do that and clamp the two spliced films together, a few minutes later the splice is solid and won't come undone. Also another important step is scrapping enough emulsion off the film base. This will provide a good clean surface for the super glue to attach too. Once you've done a few films it's an easy process. Again the proper equipment helps in this regard.
- Likes 1
Leave a comment:
-
Editing and splicing super 8
Hi,
Newbie with super 8, I've just finished shooting some super 8 and received the reversal roll back. I want to start splicing, direct animating and learning how to edit by hand, are there any tips places or sources to learn about this. I recently looked up cement film to glue the film together but wanted to know if the cement works on the latest ektachrome reversal and tri-x being sold. I read somewhere that it's a polyester material now so not sure if it will work using the cine film cement.
sorry for going on but I also got the braun fk1 editor but not sure if there a pdf manual out there for using it. Thinking of getting the minette df splicer for super 8 and 16mm for editing in the future.
Would love to hear any of your thoughts and experiences with editing by hand.
Thanks
1 PhotoTags: None
Leave a comment: