Welcome to the new 8mm Forum!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
Hi,
My Grandparents recently gave me their Kodak M67 projector and the spindles initially weren’t turning, so I opened it up, cleaned the spindle wheels and lubricated them with 3 in 1 oil. The longer belt of the two had also gotten in the way of the fan somehow, so I fixed the belt configuration. The motor now turns on but the fan won’t spin and is very resistant and not smooth when I turn it with my hand. Does anyone know a good solution to get the fan and spindles spinning? Thanks.
Leave a comment: