No announcement yet.

Elmo GS1200 broken gear in front supply arm

  • Filter
  • Time
  • Show
Clear All
new posts

  • Elmo GS1200 broken gear in front supply arm

    Click image for larger version  Name:	DE21D98B-2A3E-4EA6-B0B4-37CCAF71CB77.jpeg Views:	0 Size:	48.4 KB ID:	33042Hi Elmo GS1200 fans!

    when trying to replace the belt in the front arm or supply arm the edge broke off partially of the top gear...
    I have asked at Van Eck whether they have a replacement but no answer (these guys seem to be very busy...). Also in their spare parts finder this particular gear or wheel doesn’t show up.
    Any suggestions as to where I could get a replacement? Currently the belt still rolls and the arm is functional but it is not a great sight such a broken part.
    Have a look at this picture.

  • #2
    No doubt Edwin will reply in due course.
    He has always been very helpful in the past with broken gear replacements.


    • #3
      Just an update: Edwin van Eck came back saying they will take the two gears of the front and back arm back into production.


      • #4
        This is very thin plastic on this reels. It can break very easy, so be careful with this Parts. Nice to hear, that van Eck will bring them next time. Here a Photo from my long Version of the Front Arm.


        • #5
          I got the arm gears from Edwin van Eck and they work fabulously!