Welcome to the new 8mm Forum!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
Hello fellow enthusiasts, Does anyone know where I can get carbon brushes for the main drive motor on an Elmo GS1200 in the UK. The main drive on mine has stopped working so I took the brushes out to check only to find that one broke off at the spring. Any help would be appreciated.
Hello Clive. Mine is running on washing machine brushes which I filed down for a exact fit and been running on them for a couple of years now. Someone might come up with a better idea tho. Cost £4 from the local service guy.
Tweet
Comment