Welcome to the new 8mm Forum!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
OK folks, I now have the Kodak Movie deck manual, many thanks, Janice. Apparently, the problem with the auto rewind is the switch being dirty and needing cleaning. OK, fine. The manual gives detailed instructions on removing the screws to take the top plastic top of, but before you do this, you must remove the plastic feed platter, to get to the spring underneath, to unhook it, but the dill holes who made the manual, didn't bother to explain as to how to remove the plastic feed platter in the first place! If anybody has performed this function, could you please explain to me how? Osi