Tweet
Eumig R2000
Eumig R2000 It was running fine the just stopped No Power I am led to believe that there is a cutout but I don't know where
-
-
I believe the fuse is located inside the plug on the model that was available in the UK. It is supposed to be a 3 amp fuse. -
My bolex 102MTC (same as eumig R2000) did this.There is a cut out switch built into the sprung roller where you load the film, if it is lifted to high it shuts down, it usually happens with damaged film. If there is film in it it may be holding the sprung roller to high and preventing it from resetting itself.Comment
-
can only be a in plug fuse because inside the projector are no fuses .Comment
Comment