Announcement

Collapse
No announcement yet.

Eumig PIII

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Eumig PIII

    One question, is this Eumig PIII model an 8mm model?
    Attached Files

  • #2
    It is down as being 15mm+ 9.5mm + 8mm at the Eumig Museum

    https://eumig.at/index.php?option=co...=97&Itemid=198

    Comment


    • #3
      Brian, I already have that information but from the type of machinery I think there are 3 different models. This one can't be 9.5mm. My question is whether it is 8 or 16

      Comment


      • #4
        The film pitch cannot be both 8 and 16

        Comment


        • #5
          Other photo
          Attached Files

          Comment


          • #6
            Those sprockets look like double perf 16mm to me.

            Comment


            • #7
              I think the same.

              Comment


              • #8
                Measure across the two sprocket teeth. A 16mm sprocket should measure 12mm at this point.

                Comment


                • #9
                  From your first picture, looking at the spindles, I would say 16mm

                  Comment


                  • #10
                    Ok. Thaks

                    Comment

                    Working...
                    X