Tweet
Hi, I'm Dan Stolarczyk, a new member. I have an old Keystone 190D projector. I was using it today watching some movies from the 70's. It started to slow down so I shut it off, let it cool down for an hour and tried it again. The motor runs but it doesn't operate the reels.
I started to take it apart to lubricate everything inside. I took out a lot of screws but can't figure out how to get it apart far enough to get inside of it.
Is there a repair manual or website that will show me how to open it up?
I've been taking things apart and fixing them for 60 years but this thing is baffling me. Before I start prying things apart and break it, I want to see how to do it properly. I started searching around the internet and found this forum. This looks like the perfect place to learn.
Thanks in advance.
Dan
I started to take it apart to lubricate everything inside. I took out a lot of screws but can't figure out how to get it apart far enough to get inside of it.
Is there a repair manual or website that will show me how to open it up?
I've been taking things apart and fixing them for 60 years but this thing is baffling me. Before I start prying things apart and break it, I want to see how to do it properly. I started searching around the internet and found this forum. This looks like the perfect place to learn.
Thanks in advance.
Dan