Eumig mark s super 8 motor not running

[Martin Howlett]

The projector stopped after around an hour of use. It has done this before and worked once cooled down but this time the pilot lights illuminate but the motor doesn’t run. Left it overnight and no change. I have checked the s shaped thermal cut out fuse and this is ok. Any ideas please?

[Shane C. Collins]

You may need to locate a donor machine, and try swapping out the motor. Also having a donor or parts machine will help with any other issues that may arise. These are robust projectors, and usually don't require lots of maintenance. Other than route stuff of course!

[Martin Howlett]

Thanks for the idea, wondering why the motor stopped?

[Brian Harrington]

Either it burned out, or the transformer burned out, or both. It happens.