Tweet
This link was posted on one of the Facebook groups I'm part of that uses the Wolverine and Kodak Reels film for 8mm / Super8 film conversion:
https://tinkerdifferent.com/resource...digitiser.145/
As I understand it, this hack allows someone to modify their Wolverine firmware to adjust the capture resolution, frame rate, and bitrate (compression). I have not (yet) tried this on my Wolverine, but I intend to within the next couple days. The author believes the optimum settings are width = 1440, height = 1080, fps = 20, and bitrate/2 = 17600. Any higher on the bitrate and the Wolverine will be overtaxed and not be able to function properly.
https://tinkerdifferent.com/resource...digitiser.145/
As I understand it, this hack allows someone to modify their Wolverine firmware to adjust the capture resolution, frame rate, and bitrate (compression). I have not (yet) tried this on my Wolverine, but I intend to within the next couple days. The author believes the optimum settings are width = 1440, height = 1080, fps = 20, and bitrate/2 = 17600. Any higher on the bitrate and the Wolverine will be overtaxed and not be able to function properly.
Comment