Welcome to the new 8mm Forum!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
The film9 utility seems to be something I could use to do some badly needed color correction to some of my dad's old Agfachrome films from the 60s. But all the download sources are down as is film9.org itself.
Today this has been posted by the French deveolpers of Film9:-
The Film9 domain name has already been taken over and this poses a security problem for Film9 users.
They risk being unknowingly redirected to malicious sites, but only if they accept an update.
This is a potential risk that does not occur at this time.
Downloading a .exe file is always an issue. Not sure why they did it that way. I can download it by copying a link onto a new google chrome tab. Have not tried running it because not sure how safe it is and I already have the film9 installation. The virus check reports no viruses but one never knows. The link that you Keith posted has a French version of the manual. My installation has both English and French. I assume you get the English version once you run the setup file.
All the new version 3.2 seems to do is stop Film9 from accessing the internet to look for a new version, as there will never be one, as the French delevopers are no longer updating this software. A shame, but it is their decision to no longer support it. I guess the setup file allows the language to be selected between French & English.
Comment