Announcement

Collapse
No announcement yet.

Wolverine Reels2Digital Moviemaker and different firmware questions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Wolverine Reels2Digital Moviemaker and different firmware questions

    Hello Everyone. I've enjoyed reading through the archived and this current forum. There's a lot of great and interesting work going on here!

    I have a few questions, I hope you can guide me on the correct course of action.

    I'm using a stock Wolverine Reels2Digital Moviemaker (not the pro version). I want to scan the movies with zero magnification, images centered, low sharpness and -0.5 light. After the scan, I want to take the footage into a video editor so that I can scale and block the footage, basically keeping the 4:3 ratio, so this will block off the top and bottom margins and of course the extra left and right. Also, change the framerate per Super 8 or 8mm.

    So it looks like my best option would be to flash the firmware to the 1080x1440 firmware located here:
    http://retromania.pandelground.com/w...tal-moviemaker

    Will this firmware work with my version of the Wolverine?
    Do you feel this is the best resolution for my needs?
    Is there a different firmware I should be aware of?
    Any issues you've encountered using the proposed firmware?

    Thanks again for everyones valuable help!​​

  • #2
    Hi, the retromania firmware site is no longer available. I have a problem with my scanner, did you perhaps keep the firmware and can you send it to me by email?

    Thank you Robert​

    Comment

    Working...
    X