8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Adjusting the FRAME in Moviedeck 465

 - UBBFriend: Email this page to someone!    
Author Topic: Adjusting the FRAME in Moviedeck 465
Steve Varadi
Junior
Posts: 6
From: Lancaster, CA, USA
Registered: Oct 2017


 - posted October 13, 2017 09:51 PM      Profile for Steve Varadi   Author's Homepage   Email Steve Varadi   Send New Private Message       Edit/Delete Post 
I refurbished a 40 years old Moviedeck 465 projector. Shutter Gear and lamp changed, cleaned, lubricating. Everything is working well except one thing. I can not adjust the frame. Now the picture upper 15% is showing the bottom 15%. If somebody already successfully adjust the frame in this Moviedeck please let me know. I read the Service Manual, but no mention about the Frame adjustment.
Other projectors usually has a level with, you can adjust the Frame from outside of the House.
Thanks:
Steve

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted October 13, 2017 10:29 PM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
I remember the R8/S8 selector lever also being the framer. You just don't move it as far.

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Steve Varadi
Junior
Posts: 6
From: Lancaster, CA, USA
Registered: Oct 2017


 - posted October 14, 2017 12:19 AM      Profile for Steve Varadi   Author's Homepage   Email Steve Varadi   Send New Private Message       Edit/Delete Post 
CORRECT! You are right. I was blind [Confused] It is clearly stated FRAME. See pict: https://www.dropbox.com/s/95gb7sfipdx00y8/IMG_2010.jpg?dl=0
I just did not pay attention to the lever. I saw it is changing the FORMAT (i.e. normal 8 and super 8) but never thought this is also the Frame adjuster.
Thanks again:
Steve

 |  IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011


 - posted October 14, 2017 12:31 AM      Profile for Janice Glesser     Send New Private Message       Edit/Delete Post 
Looks like Steve answered your question. I'll post these pics anyway for future reference.

Here's the framer lever... This can be set for Reg. 8mm and Super 8mm and adjustments in between.
 -

Here's the lever linkage that moves the gate frame mask up and down.
 -

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2