8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » sankyo claw 2

- UBBFriend: Email this page to someone!    
Author Topic: sankyo claw 2
Stan Stewart
Junior
Posts: 9
From: Wesson, MS, U.S.A.
Registered: Jul 2014

- posted September 30, 2014 11:50 AM      Profile for Stan Stewart   Email Stan Stewart   Send New Private Message       Edit/Delete Post 
There are two springs attached to the claw and both seem to be strong. The claw looked a little bent out of shape. Could be the people who worked on the motor did something to the claw. I do hope the projector keeps working.

 |  IP: Logged
Andrew Woodcock
Film God

Posts: 7477
From: Manchester Uk
Registered: Aug 2012

- posted September 30, 2014 05:00 PM      Profile for Andrew Woodcock         Edit/Delete Post 
Could be Stan, but the answer to any problem on projection jitter/ instability, is NEVER to bend the claw, so if I were you, I would be be finding out what the previous owner has done and why they thought it was the correct course of action??

--------------------
"C'mon Baggy..Get with the beat"

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2