8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Help w/ Bell & Howell 461 A

 - UBBFriend: Email this page to someone!    
Author Topic: Help w/ Bell & Howell 461 A
Steve Sonsini
Junior
Posts: 1
From: Atlanta, GA, USA
Registered: Sep 2013


 - posted September 18, 2013 06:29 PM      Profile for Steve Sonsini   Email Steve Sonsini   Send New Private Message       Edit/Delete Post 
Picked up this projector at the thrift store in non-working condition, opened it up, cleaned it inside and out, new belt, lubed up the gears, etc. Everything looks to be operating correctly, but when running the film through forward, it is all jumpy and jittery. It will run it in reverse as smooth as silk.
What am I missing? Hopefully something simple?

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2