8mm Forum: What do I use to clean a projector?

»	8mm Forum » 8mm Forum » What do I use to clean a projector?

UBBFriend: Email this page to someone!

Author

Topic: What do I use to clean a projector?

Luis Gonzalez
Junior
Posts: 21
From: Chicago,Illinois
Registered: Apr 2009

posted July 04, 2009 11:28 AM

I just bought a Revere 85 projector for $2.00 (US) at a yard sale.(it works) I didn't need it but for 2 bucks I couldn't pass it up.
The projector did not have a cover and was stored in a attic so it's dusty and dirty.What can I use to clean the gate,sprockets etc. Thanks

| IP: Logged

Kevin Faulkner
Film God

Posts: 4071
From: Essex UK
Registered: Jun 2003

posted July 04, 2009 12:40 PM

I think its a case of common sense really. Probably warm soapy water for the plastic case and other plastic parts but Isopropyl alcohol on the gate parts etc.
Isoprop does not attack plastic or rubber so can safely be used on parts you cant remove.

Kev.

--------------------
GS1200 Xenon with Elmo 1.0...great combo along with a 16-CL Xenon for that super bright white light.

| IP: Logged

Luis Gonzalez
Junior
Posts: 21
From: Chicago,Illinois
Registered: Apr 2009

posted July 04, 2009 02:10 PM

Thanks, I kind of thought Isopropyl alcohol would work but I wasn't sure. So I figured I'D ask you guys and you've come through again.
Muchas Gracias,
Luis

| IP: Logged

Brad Kimball
Phenomenal Film Handler

Posts: 1171
From: Highland Mills, NY USA
Registered: Jun 2003

posted July 05, 2009 11:46 AM

Hey Kevin, I thought Isopropyl was indeed not good for rubber - that it actually can erode it. I could be wrong - just want to be sure. I wish I could recall where I read it. Consarnit - now this is going to gnaw at me until I find where I saw it.

| IP: Logged

frank arnstein
Jedi Master Film Handler

Posts: 534
From: Gold Coast. Australia
Registered: Jan 2005

posted July 27, 2009 05:55 PM

Hi to Louis, Kevin & Brad.
Cleaning projectors is something I do nearly every day.
I have got it down to a simple but effective process that works well.
1st use a stiff dry brush to remove loose surface dirt.
2nd , Cover the lens or remove it then spray the whole machine with Nifty or similar kitchen surface cleaner & let it soak for a minute.
Then use a clean paint brush to work the nifty in, all over the body.
Next, use a clean cotton rag & wipe it all down. Gentle Air blow if you have compressed air.
Finally, use evaporative Brake Clean to clean the gate area & Claw & any other realy grimy areas.
To make them look real good after its clean, use Mr Shean or Armourall to restore the surface gleam.
I love the way the dirtiest projector can come out gleaming and looking terrific for display.
Good luck with yours.
dogtor pufferfish

--------------------
At Projector Heaven the Focus is always on Detail.

____
[o:/o]<|=- dogtor@projectorheaven.com.au
//``\\
-----------------------------------------------

| IP: Logged

Glenn Brady
Expert Film Handler

Posts: 117
From: North Carolina, USA
Registered: Nov 2006

posted July 27, 2009 06:41 PM

Although it may be effective for drying, compressed air applied to cameras and projectors for cleaning seems to me to be good only for blowing dirt deeper into the works (I often think canned air was invented by a camera repairer hoping to generate more business). I use a small vacuum cleaner and a soft brush in a clean environment when working on such gear.

| IP: Logged

Paul Adsett
Film God

Posts: 5003
From: USA
Registered: Jun 2003

posted July 27, 2009 07:15 PM

A shop-vac, fitted with the little adapters for cleaning electronics, does a terrific job of pulling out dust and grime from the innards of the projector. I would never 'wash' the projector in anything. Much better to do hand cleaning with q-tips moistoned with furniture polish. Armorall wipes are great for restoring the exterior of the projector to as new condition, and are also great for the film path and all plastic components.
Here is my own Revere 88, also found dirty and disfunctional at a garage sale FOR $5.00, but now fully restored after a little TLC:

--------------------
The best of all worlds- 8mm, super 8mm, 9.5mm, and HD Digital Projection,
Elmo GS1200 f1.0 2-blade
Eumig S938 Stereo f1.0 Ektar
Panasonic PT-AE4000U digital pj

| IP: Logged

Brad Kimball
Phenomenal Film Handler

Posts: 1171
From: Highland Mills, NY USA
Registered: Jun 2003

posted July 28, 2009 11:31 AM

Paul - that looks sensational! WOW!

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2