Posts: 2110
From: Loganville, Georgia, USA
Registered: Jun 2003
posted July 27, 2009 08:00 PM
Kev, I installed the new rear guide assembly you sent me. Wow! it looks great. When I went to screw in the shaft that holds the assembly to the projector I saw there were no threads. The threaded metal sleeve in the chassis was missing. Yikes! I visited the hardware store and found a small metric thread nut. I bought a bolt to go with it. I threaded the nut over the bolt and clamped it in a pair of vice grips and proceeded to file the sides of the nut until the corners were gone and it was round. Then I drilled a larger hole in the chassis so the nut would fit snug. A few drops of super glue on the nut and placed it in the hole while it was still on the bolt in order to line it up perpendicular to the chassis. When it dried I installed the rear guide and it works beautifully. I am a happy camper. Thanks.