8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Various Elmo models and parts compatibility

- UBBFriend: Email this page to someone!    
Author Topic: Various Elmo models and parts compatibility
Tony Stucchio
Jedi Master Film Handler

Posts: 625
From: New Jersey
Registered: Dec 2005

- posted October 10, 2009 07:06 PM      Profile for Tony Stucchio     Send New Private Message       Edit/Delete Post 
Can anyone comment on the compatibility of parts among the various Elmo models? In another post, I talked about replacing the claw in an ST-1200 HD. I replaced it with one from another broken down ST-1200 HD parts machine. What other models share shutter/rubber wheel/claw compatibilty with the ST-1200 HD? What about other parts?

thanks

 |  IP: Logged
Tony Stucchio
Jedi Master Film Handler

Posts: 625
From: New Jersey
Registered: Dec 2005

- posted October 29, 2009 05:45 PM      Profile for Tony Stucchio     Send New Private Message       Edit/Delete Post 
Anyone know about the cam assy, which includes the axle that the cam is attached to.

thanks

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2