Author
|
Topic: Protecting Films During A Move
|
|
|
|
|
|
|
|
Winbert Hutahaean
Film God
Posts: 5468
From: Nouméa, New Caledonia
Registered: Jun 2003
|
posted May 10, 2012 09:15 AM
Scott,
You are transporting print film not fresh films, so temperature is not that issue, as long as it not extreme. I can say it is like you are transporting color posters. If you put a poster into direct sunlight of course it is going to get color fade, otherwise it will be fine.
Just for your peace of mind, during the 35mm era, print films were packed inside cans and distributed around the world by wood pallet. They arrived no wrong in cinemas.
As I am in Canada, I can assure you that Montreal is the best place for film group, as many Canadian movies are made in Montreal (Quebec). But those groups more to film makers/shooters not collectors like us.
I have been here in Canada for 3 years but don't really see movie collectors. Most projectors I have found is the most common Bell & Howell.
cheers,
-------------------- Winbert
| IP: Logged
|
|
|
|
Dino Everette
Phenomenal Film Handler
Posts: 1535
From: Long Beach, CA USA
Registered: Dec 2008
|
posted May 10, 2012 06:53 PM
Scott, yes I would simply make sure you pack them in moving boxes with absolutely no chance for movement within the box, so they won't shift around, but you will be safe...I have drive a van filled with nitrate across states with no problems...The temp is not going to have a chance to have much of an effect on them for such a short move unless it was an open bed truck or something...But in a moving truck it may get warm, but not enough to cause damage...YOUR PROJECTORS on the other hand could get destroyed, so I would say pack them in a box, and then put that box into a bigger box filled with popcorn, or foam or something soft and protective, other wise you may be sorry.
-------------------- "You're too Far Out Miss Lawrence"
| IP: Logged
|
|
|
|