posted January 03, 2013 08:14 AM
Hi to all . J've a ELMO ST 1200 HD , and recently the image is not stable.J disassembly the claw and j 've seen that the plastic cilinder embedded in the claw's arm was a little worn (nothing of serious) ,and the below tooth have a little notch.J smooth gently , and the notch has disappeared, but now ask help because j 'dont know how adjust the claw. No problem for lateral adjust (left-right), but the problem is for the front - rear adjust .J know that the claw should protrude for 1 mm , but j dont find the bolt to move (toward rear) the claw .For Elmo GS 1200 there is a dedicate bolt , but what shall j 'o for adjust the claw in longitudinal direction for ELMO ST 1200 HD? Is possible to rotate the plastic cilinder for 180° ? Any help?
posted January 04, 2013 08:18 AM
for my problem above 'j'm searching in the web the elmo ST 1200 HD SERVICE MANUAL (no the user manual) , but j do not find it. Who can help me to find this manual ? Thank you.
Posts: 1592
From: United States
Registered: Jun 2003
posted January 04, 2013 03:57 PM
I know this came up before, but I can't see that column on the left side with the manuals, chat room, etc.(that Bob mentioned) anymore. With either IE or Mozilla Firefox.
Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003
posted January 04, 2013 04:08 PM
I've had that problem too a while back. I deleted the link in favorites and came into the forum in some different way (not sure, it's been a while...) and then the sidebar appeared.
I favorited that webpage and have had the sidebar ever since.
posted January 05, 2013 11:42 AM
Thank you Bob and Steve for yours help but j'just have the elmo st 1200 , but do not report any information about claw adjust.